Autors: Petrov, D. G., K.D.Dearn., T.J.Hoskins., S.C.Reynolds., R.Banks.
Title: Applications of dry film lubricants for polymer gears
Keywords: Polymers, Solid lubricant, Gears, Solid lubricant coating, W

Abstract: Polymer gears can be run without lubrication, however, high running temperatures, driven by high contact friction, mean that the operating life of these gears tends to be low and limited by wear. This paper describes an attempt to control friction and wear by reducing the running temperatures by using a series of solid lubricant coatings deposited on flanks of the polymer gear teeth. Four potential coatings were selected, viz. molybdenum disulphide, graphite flake, hexagonal boron nitride and poly-tetra-fluoro-ethylene (PTFE). Each coating was used with both reinforced and unreinforced poly-ether-ether-ketone and unreinforced polyamide. Tests were carried out on coated-coated, coated-steel and coated gears running against uncoated gears. Wear rates and running temperatures were recorded. Results indicate that PTFE provided the greatest reduction in frictional forces and that failure mechanisms were predominately in delamination of the coatings and abrasive wear.

References

    Issue

    Wear, vol. Volumes 298–299, pp. Pages 99-108, 2013, Netherlands, Elsevier, ISBN ISSN: 0043-1648

    Full text of the publication

    Цитирания (Citation/s):
    1. Hernández-Sierra, M.T., Marta, J.E., Aguilera-Camacho, L.D., Garciá-Miranda, J.S., Baéz-Garciá, J.E., Moreno, K.J. 57201318087;57219903069;56108715300;56498473400;57193999441;8713969800; Mechanical and bio-lubricated friction performance of PA6G for gear applications (2020) MRS Advances, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85096007018&doi=10.1557%2fadv.2020.398&partnerID=40&md5=e16aff0d3d16961665a370886a95dad5 DOI: 10.1557/adv.2020.398 DOCUMENT TYPE: Article PUBLICATION STAGE: Article in Press SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    2. Trobentar, B., Kulovec, S., Hlebanja, G., Glodež, S. 57190870224;43461275500;6505842264;7004485428; Experimental failure analysis of S-polymer gears (2020) Engineering Failure Analysis, 111, art. no. 104496, . Cited 4 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85081130767&doi=10.1016%2fj.engfailanal.2020.104496&partnerID=40&md5=27116d75367bec96f5f8d637dfbcba2b DOI: 10.1016/j.engfailanal.2020.104496 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    3. Bae, S.-M., Seo, K.-J., Kim, D.-E. 57218285925;57189899261;25647956200; Effect of friction on the contact stress of a coated polymer gear (2020) Friction, 8 (6), pp. 1169-1177. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85088586800&doi=10.1007%2fs40544-020-0363-6&partnerID=40&md5=01c05c1341a3b43be464dda9a3a20157 DOI: 10.1007/s40544-020-0363-6 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    4. Muralidhara, B., Babu, S.P.K., Suresha, B. 57216964117;57201545399;13405699200; Studies on mechanical, thermal and tribological properties of carbon fibre-reinforced boron nitride-filled epoxy composites (2020) High Performance Polymers, 32 (9), pp. 1061-1081. Cited 3 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85086675727&doi=10.1177%2f0954008320929396&partnerID=40&md5=ad52d1e9bd991dc52eb0e06735dd8dc1 DOI: 10.1177/0954008320929396 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    5. Soudmand, B.H., Shelesh-Nezhad, K. 57164067000;7801506859; Study on the gear performance of polymer-clay nanocomposites by applying step and constant loading schemes and image analysis (2020) Wear, 458-459, art. no. 203412, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85089532979&doi=10.1016%2fj.wear.2020.203412&partnerID=40&md5=ea1f50ad314749582ee572db572d2938 DOI: 10.1016/j.wear.2020.203412 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    6. Tóth, L.F., Sukumaran, J., Szebényi, G., Kalácska, Á., Fauconnier, D., Nagarajan, R., De Baets, P. 57194568025;15729909700;24767991000;57205515705;16309600900;46161519800;56227848200; Large-scale tribological characterisation of eco-friendly basalt and jute fibre reinforced thermoset composites (2020) Wear, 450-451, art. no. 203274, . Cited 2 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85082190693&doi=10.1016%2fj.wear.2020.203274&partnerID=40&md5=f4bc4fbf014c0ca882648fdc2242f90b DOI: 10.1016/j.wear.2020.203274 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    7. Soudmand, B.H., Shelesh-Nezhad, K. 57164067000;7801506859; Failure and wear analysis of poly(butylene terephthalate) nanocomposite spur gears (2020) Tribology International, 151, art. no. 106439, . Cited 5 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85085350682&doi=10.1016%2fj.triboint.2020.106439&partnerID=40&md5=896f0aee96d1336b3e29463c3c8f285f DOI: 10.1016/j.triboint.2020.106439 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    8. Liu, H., Liu, H., Zhu, C., Parker, R.G. 57201074006;36805937100;7403440361;35262773300; Effects of lubrication on gear performance: A review (2020) Mechanism and Machine Theory, 145, art. no. 103701, . Cited 22 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85075558365&doi=10.1016%2fj.mechmachtheory.2019.103701&partnerID=40&md5=e60b35133122bfda56501ab257dda670 DOI: 10.1016/j.mechmachtheory.2019.103701 DOCUMENT TYPE: Review PUBLICATION STAGE: Final SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    9. Gowda, M.R.S., Hemavathi, A.B., Srinivas, S., Santhosh, G., Siddaramaiah, H. 57216894055;57216894808;57212875558;57076631500;57188972901; Physico-mechanical, thermal, and tribological studies of polytetrafluoroethylene-filled polyoxymethylene/silicone composites (2020) Journal of Thermoplastic Composite Materials, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85085194944&doi=10.1177%2f0892705720925117&partnerID=40&md5=a7921c641ad62e915361722cbb7e940f DOI: 10.1177/0892705720925117 DOCUMENT TYPE: Article PUBLICATION STAGE: Article in Press SOURCE: Scopus - 2020 - в издания, индексирани в Scopus или Web of Science
    10. Goriparthi, B.K., Naga Eswar Naveen, P., Ravi Sankar, H. 54879423800;57220066883;57211941026; Performance evaluation of composite gears composed of POM, CNTs, and PTFE (2021) Polymer Composites, 42 (3), pp. 1123-1134. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85096750238&doi=10.1002%2fpc.25887&partnerID=40&md5=a6878cef3ed54025f32e70f7b05a55f9 DOI: 10.1002/pc.25887 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2021 - в издания, индексирани в Scopus или Web of Science
    11. Keresztes, R., Gabor, K., Nagarajan, R., Subramanian, K., Jacob, S., Ismail, S.O. 16301484600;7003916554;57220745488;57189901107;57223113337;56828817600; Tribological Analysis of Engineering Plastics/Steel Friction Pairs (2021) Transactions of the Indian Institute of Metals, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85104855385&doi=10.1007%2fs12666-021-02231-8&partnerID=40&md5=d45c75a59ed9e40061e2529f452eb509 DOI: 10.1007/s12666-021-02231-8 DOCUMENT TYPE: Article PUBLICATION STAGE: Article in Press SOURCE: Scopus - 2021 - в издания, индексирани в Scopus или Web of Science
    12. Pandian, A.K., Gautam, S.S., Senthilvelan, S. 57221558138;55508569800;9638097400; Effect of metal and polymer mating gears on the bending fatigue performance of asymmetric polymer gears (2021) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85104361070&doi=10.1177%2f14644207211003321&partnerID=40&md5=7acec30f1197acdc18ea177efd2f1bea DOI: 10.1177/14644207211003321 DOCUMENT TYPE: Article PUBLICATION STAGE: Article in Press SOURCE: Scopus - 2021 - в издания, индексирани в Scopus или Web of Science
    13. Soudmand, B.H., Shelesh-Nezhad, K. 57164067000;7801506859; Experimental investigation on the durability and failure modes of polybutylene terephthalate/calcium carbonate nanocomposite gears (2021) Engineering Failure Analysis, 120, art. no. 105113, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85097087672&doi=10.1016%2fj.engfailanal.2020.105113&partnerID=40&md5=fa233219e03971ebd13d8e8c65576343 DOI: 10.1016/j.engfailanal.2020.105113 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2021 - в издания, индексирани в Scopus или Web of Science
    14. Yin, X., Jin, J., Chen, X., Rosenkranz, A., Luo, J. 57207246418;36985649400;55768085400;55480862200;7404182646; Ultra-Wear-Resistant MXene-Based Composite Coating via in Situ Formed Nanostructured Tribofilm (2019) ACS Applied Materials and Interfaces, 11 (35), pp. 32569-32576. Cited 18 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85071784866&doi=10.1021%2facsami.9b11449&partnerID=40&md5=efc7f5af0d8a2e5db9e5eaad188c8f2d DOI: 10.1021/acsami.9b11449 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    15. Jain, M., Patil, S., Ghosh, S.S. 57211790347;55899344900;57212685086; A review on failure characteristics of polymeric gears (2019) AIP Conference Proceedings, 2148, art. no. 030057, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85072269651&doi=10.1063%2f1.5123979&partnerID=40&md5=aef705477dd084fd9f5e2c9d0231f3de DOI: 10.1063/1.5123979 DOCUMENT TYPE: Conference Paper PUBLICATION STAGE: Final SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    16. Lu, Z., Liu, H., Zhu, C., Song, H., Yu, G. 57208245222;36805937100;7403440361;57208236092;57208238233; Identification of failure modes of a PEEK-steel gear pair under lubrication (2019) International Journal of Fatigue, 125, pp. 342-348. Cited 14 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85064234101&doi=10.1016%2fj.ijfatigue.2019.04.004&partnerID=40&md5=c797feb78c5b84b5316ece16ef15a83b DOI: 10.1016/j.ijfatigue.2019.04.004 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    17. Stead, I.M.N., Eckold, D.G., Clarke, H., Fennell, D., Tsolakis, A., Dearn, K.D. 57208341565;57191635436;57194082864;55814921800;8298589700;22936874800; Towards a plastic engine: Low—temperature tribology of polymers in reciprocating sliding (2019) Wear, 430-431, pp. 25-36. Cited 4 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85064563068&doi=10.1016%2fj.wear.2019.04.008&partnerID=40&md5=206787ec3c621f7d30788a230c56be6d DOI: 10.1016/j.wear.2019.04.008 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    18. Sathees Kumar, S. 57190009971; Mechanical and water absorption properties of madar and bauhinia racemosa natural fiber composites (2019) International Journal of Recent Technology and Engineering, 8 (2), pp. 2338-2342. Cited 2 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85071086340&doi=10.35940%2fijrte.b2815.078219&partnerID=40&md5=e3f4d70779a254c56ba1ad1d99bb35d0 DOI: 10.35940/ijrte.b2815.078219 DOCUMENT TYPE: Article PUBLICATION STAGE: Final OPEN ACCESS: All Open Access, Bronze SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    19. Stead, I.M.N., Roberts, A., Eckold, D.G., Dearn, K.D. 57208341565;57208863088;57191635436;22936874800; Cold, clean and green: Improving the efficiency and environmental impact of a cryogenic expander (2019) IOP Conference Series: Materials Science and Engineering, 502 (1), art. no. 012157, . https://www.scopus.com/inward/record.uri?eid=2-s2.0-85065995848&doi=10.1088%2f1757-899X%2f502%2f1%2f012157&partnerID=40&md5=1ca721c3e175cc4548c509e34148d033 DOI: 10.1088/1757-899X/502/1/012157 DOCUMENT TYPE: Conference Paper PUBLICATION STAGE: Final OPEN ACCESS: All Open Access, Bronze SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    20. Rodríguez-Beltrán, R.I., Martínez-Tong, D.E., Reyes-Contreras, A., Paszkiewicz, S., Szymczyk, A., Ezquerra, T.A., Moreno, P., Rebollar, E. 56674757200;55249689200;56473680500;55363620300;7004160677;7005455711;36885726600;15021220700; Laterally-resolved mechanical and tribological properties of laser-structured polymer nanocomposites (2019) Polymer, 168, pp. 178-184. Cited 4 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85062295053&doi=10.1016%2fj.polymer.2019.02.034&partnerID=40&md5=254a56d1d0a9b01b11674f34b3de4924 DOI: 10.1016/j.polymer.2019.02.034 DOCUMENT TYPE: Article PUBLICATION STAGE: Final OPEN ACCESS: All Open Access, Green SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    21. Schubert, D., Hertle, S., Drummer, D. 57209833333;57190014460;6602422705; Impact of process-related microstructures on the tooth-strength rating of pom spur gears [Einfluss prozessbedingter gefügestrukturen auf die zahnfußtragfähigkeit von pom-stirnrädern] (2019) Konstruktion, 2019 (3), pp. 75-81. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85085241036&partnerID=40&md5=a1e83f8cfe4869ced9b7e7d07c5df784 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    22. Schubert, D., Hertle, S., Drummer, D. 57209833333;57190014460;6602422705; Influence of titanium oxide-based colourants on the morphological and tribomechanical properties of injection-moulded polyoxymethylene spur gears (2019) Journal of Polymer Engineering, . Cited 4 times. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85070293329&doi=10.1515%2fpolyeng-2019-0170&partnerID=40&md5=780c045acb8d372021c88a996dcf4910 DOI: 10.1515/polyeng-2019-0170 DOCUMENT TYPE: Article PUBLICATION STAGE: Article in Press SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    23. Czinege, I. 6507113873; Mass optimization of gears (2019) Periodica Polytechnica Mechanical Engineering, 63 (2), pp. 75-79. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85065310136&doi=10.3311%2fPPme.11648&partnerID=40&md5=7fbf950b792ea8b7733c08b140a8adec DOI: 10.3311/PPme.11648 DOCUMENT TYPE: Article PUBLICATION STAGE: Final OPEN ACCESS: All Open Access, Gold SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    24. Kumar, S.P., Suman, K.N.S., Ramanjaneyulu, S. 57216090744;23486871300;57196218027; A review on tribological performance characteristics of plastic gears (2019) International Journal of Mechanical Engineering and Technology, (1), pp. 516-526. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85060917577&partnerID=40&md5=71a4748765fcfb70f986cac1c02f7379 DOCUMENT TYPE: Article PUBLICATION STAGE: Final SOURCE: Scopus - 2019 - в издания, индексирани в Scopus или Web of Science
    25. Norani, Mohamad & Chua, Muhammad Ilman Hakimi & Abdollah, Mohd Fadzli Bin & Amiruddin, Hilmi & Ramli, Faiz & Tamaldin, Noreffendy. (2021). Mechanical and tribological properties of FFF 3D-printed polymers: A brief review. 29. 11-30. - 2021 - от чужди автори в чужди издания, неиндексирани в Scopus или Web of Science

    Вид: статия в списание, публикация в издание с импакт фактор, публикация в реферирано издание, индексирана в Scopus