Е-Публикации
Технически университет - София

Abstract: Rotation positioning systems are widely used in different orientation positioning or metrology systems. Analysis of their performance is an essential part of the development and verification of the metrology requirements. As a second stage of the performance analysis of the developed elastic micro-positioning module with 'butterfly' flexures after the simulation study is the experimental study. Such a case study is representing the behavior of the elastic module in the application. One of the main accuracy characteristics is the deviation of the axis of rotation as it has major impact of the metrology performance of angular positioning modules. This paper presents the results of the study of the axis stability of micro-positioning elastic module.

References

1. Ashby MF. Materials selection in mechanical design.2nd ed. Oxford: Butterworth-Heinemann; 1999.
2. Diakov D., Komarski D., Nikolova H., Optimization of Butterfly Flexures for Angular Positioning, (2021) 31st International Scientific Symposium Metrology and Metrology Assurance, MMA 2021, DOI: 10.1109/MMA52675.2021.9610833
3. Diakov D., Komarski D., Micro-positioning Module for Angular Orientation Position of the Axis of Rotation Analysis, (2021) 31st International Scientific Symposium Metrology and Metrology Assurance, MMA 2021, DOI: 10.1109/MMA52675.2021.9610873
4. Dichev, D., Koev, H., Bakalova, T., Louda, P. A Model of the Dynamic Error as a Measurement Result of Instruments Defining the Parameters of Moving Objects. Measurement Science Review, Volume 14, Issue 4, 2014, 183-189, ISSN 1335-8871, https://doi.org/10.2478/msr-2014-0025
5. Kupriyanov O., R. Trishch, D. Dichev, T. Bondarenko. Mathematic Model of the General Approach to Tolerance Control in Quality Assessment. Lecture Notes in Mechanical Engineering, 3rd Grabchenko's International Conference on Advanced Manufacturing Processes,InterPartner-2021, September 7-10, Lecture Notes in Mechanical Engineering, 2021, pp. 415-423. DOI: 10.1007/978-3-030-91327-4-41
6. Dichev, D., Koev, H., Bakalova, T., Louda, P. suring Method for Gyro-Free Determination of the Parameters of Moving Objects. Metrology and Measurement Systems. Volume 23, Issue 1, 2016, pp. 107-118. DOI 10.1515/mms-2016-0001
7. Dyakov D., I. Kalimanova, Opredelyane polozhenie na osta na rotatsiya na goniometrichni pozitsioneri, Sbornik dokladi ot 1-va konferentsiya s mezhd. uchastie "Mashinoznanie i mashinni elementi", Sofiya, 4-6 Noemvri 2004
8. Hui Tang, Yangmin Li and Jiming Huang, Design and analysis of a dual-mode driven parallel XY micromanipulator for micro/nanomanipulations, Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 1989-1996 (vols 203-210) 226(12):3043-3057, DOI:10.1177/0954406212442272
9. ISO 230-7:2015 Test Code For Machine Tools. Geometric Accuracy Of Axes Of Rotation
10. Kim, Yong-Sik & Shi, Hongliang & Dagalakis, Nicholas & Gupta, Satyandra. (2016). Design of a MEMS-based motion stage based on a lever mechanism for generating large displacements and forces. Journal of Micromechanics and Microengineering. 26. 095008. 10.1088/0960-1317/26/9/095008
11. Malakov, I., Topalova, I., System development of representative criteria for choosing an optimal variant of technical product (2009) Annals of DAAAM and Proceedings of the International DAAAM Symposium, pp. 1335-1336. https://www.scopus.com/inward/ record.urieid=2-s2.0-84904336234&partnerID=40&md5=067a9 d35912eeca806e7344421aceb8d, ISSN17269679, ISBN 978-390150970-4
12. Georgiev, B., Karadzhov, T., "Investigating the Repeatability of 3D Printers Using a Multi-Sensor Measurement System", In ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference, volume 3, 2024, June, pp. 65-69. DOI: 10.17770/etr2024vol3.8114.
13. Michael F. Ashby-Materials Selection In Mechanical Design 4Ed, Butterworth-Heinemann 2010, ISBN-13 978-9380931722
14. Qian LU, Optimization Design of Flexible Micro-Displacement Amplification Mechanism Based on Parameters, School of Mechanical Engineering, Yancheng Institute of Technology, Yancheng City, Jiangsu Province 224051, P.R. China, https://doi.org/10.6180/jase.2015.18.4.05
15. Dochev, B., Dimova, D., Zagorski, M., Kasabov, P., Chuchulska, B., Investigation of the influence of artificial aging parameters on the micro and macro hardness of AlSi12Cu5MgCr and AlSi12Cu5Mn alloys Vide. Tehnologija. Resursi-Environment, Technology, Resources, 3, pp. 48-52.DOI: 10.17770/etr2024vol3.8103
16. Slocum A. Precision Machine Design. Englewood Cliffs, New Jersey: Prentice Hall; 1992. ISBN: 978-0872634923
17. Stranczl M., E. Sarajlic, H. Fujita, M. A. M. Gijs and C. Yamahata, "High-Angular-Range Electrostatic Rotary Stepper Micromotors Fabricated With SOI Technology," in Journal of Microelectromechanical Systems, vol. 21, no. 3, pp. 605-620, June 2012, doi: 10.1109/JMEMS.2012.2189367
18. Vasilev V., Nikolova H., Programno osiguryavane na sistemi za izmervane na otkloneniyata na formata i razpolozhenieto na povrkhninite i osite na detalite, Sofiya, Softtred, 2020, ISBN 978-954-334-231-0
19. Georgiev, B., Karadzhov, T., "Comparative Analysis f Geometric Deviations in Contact Measuring Instruments for Control and Laser Contactless Scanning", In ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference, volume 3, 2023, June, pp. 306-310. DOI: 10.17770/etr2023vol3.7182.
20. Xu Pei1, Jingjun Yu, Guanghua Zong, Shusheng Bi, A Family of Butterfly Flexural Joints: Q-LITF Pivots, School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, R.P. China, DOI:10.1115/DETC2011-48394
21. Zentner L, Lins S. Compliant Systems-Mechanics of Elastically Deformable Mechanisms, Actuators and Sensors. Munchen: De Gruyter Oldenbourg; 2019, 166 p., ASIN: B06Y6FNSXB
22. D. Dichev et al., Mathematical Model for Increasing Accuracy when Measuring Linear Quantities in Conditions of External Mechanical Impacts, 2023 XXXIII International Scientific Symposium Metrology and Metrology Assurance (MMA), Sozopol, Bulgaria, 2023, pp. 1-6, doi: 10.1109/MMA59144.2023.10317908.
23. Tsenkov T, Gerchev A. Concomitance of Rotator Cuff Disease in Symptomatic Anterior Shoulder Instability. J of IMAB. 2022 Jul-Sep;28(3):4517-4520. DOI: 10.5272/jimab.2022283.4517
24. Dichev D., D. Diakov, R. Dicheva. Method for increasing the accuracy of linear measurements based on a measurement-computational approach. AIP Conference Proceedings. 2505. 120008. 10.1063/5.0101084.
25. Diakov, D., Kalimanova, I., Nikolova, H., Miteva, R., Spatial Stability Investigating and Angular Orientation Ensuring of the Laser Beams of a Dual-channel LMS, 32nd International Scientific Symposium Metrology and Metrology Assurance, MMA 2022, DOI: 10.1109/MMA55579.2022.9992792
26. Zagorski, M., Miltchev, R., Semkov, M., Computer Modeling and Simulation of Mechanisms using Free and Open-source Software(2024) Vide. Tehnologija. Resursi-Environment, Technology, Resources, 3, pp. 352-356. DOI: 10.17770/etr2024vol3.8143

Issue