Е-Публикации
Технически университет - София

Abstract: This chapter considers different technologies for energy harvesting and storage applications, produced by 3D printing technologies and used for small sensing device powering. A review of energy harvesting methods, from accessible environmental sources such as electromagnetic fields and waves, mechanical vibration, and light, temperature, and pressure differences, applied via 3D-printed devices and materials, is presented. A comparison of the limitations of the current state-of-theart is provided, and future technological trends and boundaries are highlighted. No part of this publication may be reproduced, stored in a retrieval system, subjected to any form of TDM or used for the training of any AI systems or similar technologies, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the publisher, or as expressly permitted by law or under terms agreed with the appropriate rights organization. Certain types of copying may be permitted in accordance with the terms of licences issued by the Copyright Licensing Agency, the Copyright Clearance Centre and other reproduction rights organizations.

References

1. Mateev V and Marinova I 2021 ANN for electromagnetic design optimization 12th Nat. Conf. with Int. Participation ELECTRONICA pp 1-5
2. Migliorini L et al 2022 Nanomaterials and printing techniques for 2D and 3D soft electronics Nano Furtures ó 032001
3. Aliheidari N, Hohimer C and Ameli A 2017 3D-printed conductive nanocomposites for liquid sensing applications Conf. on Smart Materials, Adaptive Structures and Intelligent Systems vol 1 (New York: ASME)
4. Ralchev M, Mateev V and Marinova I 2021 3D Printed Electrically Conductive Composites by FFF/FDM Technology 13th Electrical Engineering Faculty Conf. BulEF
5. Ralchev M, Mateev V and Marinova I 2021 Magnetic properties of FFF/FDM 3D printed magnetic material 17th Conf. on Electrical Machines, Drives and Power Systems (ELMA) (Sofia)
6. Ralchev M, Mateev V and Marinova I 2022 3D printed polymer composite magnetic material by stereolithography technology 22nd Int. Symp. on Electrical Apparatus and Technologies (SIELA) (Bourgas)
7. White G K 1987 Experimental Techniques in Low-temperature Physics 3rd edn (Oxford:Oxford University Press)
8. Wang T, Huang K, Liu W, Hou J and Zhang Z 2022 A hybrid solar-RF energy harvesting system based on tree-shaped antenna array Int. J. RF Microw. Comput. Aided Eng 32 10
9. Kahar K et al 2022 MEMS-based energy scavengers: journey and future Microsyst. Technol. 28 1971-93
10. Wang Z, Huber C, Hu J, He J, Suess D and Wang S 2019 An electrodynamic energy harvester with a 3D printed magnet and optimized topology Appl. Phys. Lett. 114 013902
11. Takemura N, Kohara Y, Ichikawa S and Kondo H 2017 A study of directional antenna for recycled energy improvement in electromagnetic wave energy harvesting IEEE Int. Symp. on Antennas and Propagation and USNC/URSI Nat. Radio Science Meeting
12. Bedair S et al 2021 Piezoelectric and ferroelectric devices for energy efficiency and power IEEE Int. Symp. on Applications of Ferroelectrics (ISAF) (Sydney)
13. Zhang C, Zhou Y J, Xiao Q X, Yang L, Pan T Y and Ma H F 2016 High-efficiency electromagnetic wave conversion metasurfaces for wireless energy harvesting Progress in Electromagnetic Research Symp. (PIERS) (Shanghai)
14. Yang Z, Jia S, Niu Y, Lv X, Fu H, Zhang Y, Liu D, Wang B and Li Q 2021 Bean-pod- inspired 3D-printed phase change microlattices for solar-thermal energy harvesting and storage Small 17 2101093
15. Tol S, Degertekin F L and Erturk A 2017 3D-printed lens for structure-borne wave focusing and energy harvesting Active and Passive Smart Structures and Integrated Systems (Portland, OR) (SPIE) 10164
16. Nauroze S A et al 2016 Additive manufacturing technologies for near-and far-field energy harvesting applications IEEE Radio and Wireless Symp. (RWS) (Austen TX)
17. Christians J A, Marshall A R, Zhao Q, Ndione P, Sanehira E M and Luther J M 2018 Perovskite quantum dots. A new absorber for perovskite-perovskite tandem solar cells IEEE 7th World Conf. on Photovoltaic Energy Conversion (WCPEC) (Waikoloa, HI)
18. Wang Z, Zhan Z, Chen L, Duan G, Cheng P, Kong H, Chen Y and Duan H 2022 3D- printed bionic solar evaporator Sol. RRL 6 2101063
19. Melgarejo V, García L, Reifenberger J and Newell B 2018 Manufacture of lenses and diffraction gratings using DLP as an additive manufacturing technology Proc. ofthe ASME Conf. on Smart Materials, Adaptive Structures and Intelligent Systems 2
20. Peng J et al 2019 3D extruded composite thermoelectric threads for flexible energy harvesting Nat. Commun. 10 5590
21. Noh Y S et al 2021 A reconfigurable DC-DC converter for maximum TEG energy harvesting in a battery-powered wireless sensor node IEEE Int. Solid- State Circuits Conf. (ISSCC) (San Francisco, CA)
22. Adhikari P R, Islam M N, Jiang Y, Reid R C and Mahbub I 2022 Reverse electrowetting- on-dielectric energy harvesting using 3-D printed flexible electrodes for self-Powered wearable sensors IEEE Sens. Lett. 6 6001704
23. Gowthaman S et al 2018 A review on energy harvesting using 3D printed fabrics for wearable electronics J. Inst. Eng. India Ser. C 99 435-47
24. Yuan M, Cao Z, Luo J and Pang Z 2018 Helix structure for low frequency acoustic energy harvesting Rev. Sci. Instrum. 89 055002
25. Kawa B and Walczak R 2021 3D printed multi-frequency vibrational energy harvester IEEE 20th Int. Conf. on Micro and Nanotechnology for Power Generation and Energy Conversion Applications Power MEMS
26. Feng Y, Zhang X, Han Y, Yu Z and Lou W 2017 Airflow-driven rotary electret energy harvester 12th Int. Conf. on Nano/Micro Engineered and Molecular Systems (NEMS) (Los Angeles, CA)
27. Yadav M, Yadav D, Garg R K, Gupta R K, Kumar S and Chhabra D 2021 Advances in Fluid and Thermal Engineering (Lecture Notes in Mechanical Engineering) (Singapore: Springer)
28. Rafiee M, Granier F, Tao R, Bhérer-Constant A, Chenier G and Therriault D 2022 Multi-material, multi-process, planar, and nonplanar additive manufacturing of piezoelectric devices Adv. Eng. Mater. 24 2200294
29. Mahmud M et al 2022 Advanced design, fabrication, and applications of 3D-printable piezoelectric nanogenerators Electron. Mater. Lett. 18 129-44
30. Shepelin N A et al 2019 3D printing of poly(vinylidene fluoride-trifluoroethylene): a poling-free technique to manufacture flexible and transparent piezoelectric generators MRS Commun. 9 159-64
31. Rauter L et al 2022 Printed wireless battery-free sensor tag for health monitoring ofpolymer composites IEEE Int. Conf. on Flexible and Printable Sensors and Systems (FLEPS)
32. Liu X, Shang Y, Zhang J and Zhang C 2021 Ionic liquid-assisted 3D printing of self-polarized /3-PVDF for flexible piezoelectric energy harvesting ACS Appl. Mater. Interfaces 13 14334-41
33. Li H, Song Y S, Kim T W, Lee M H and Lim S 2022 Fully printed flexible piezoelectric nanogenerators with triethoxyvinylsilane (TEVS) coated barium titanate (BTO) nanopar-ticles for energy harvesting and self-powered sensing Macromol. Mater. Eng. 307 2200235
34. Rahman S, Arshad M, Qureshi A and Ullah A 2020 Fabrication of a self-healing, 3D printable, and reprocessable biobased elastomer ACS Appl. Mater. Interfaces 12 51927-39
35. Liu X, Liu J, He L, Shang Y and Zhang C 2022 3D printed piezoelectric-regulable cells with customized electromechanical response distribution for intelligent sensing Adv. Funct. Mater. 32 2201274
36. Stephen A et al 2022 3D-printed flexible anode for high-performance zinc ion battery MRS Commun. 12 894-901
37. Li C, Du J, Gao Y, Bu F, Tan Y H, Wang Y, Fu G, Guan C, Xu X and Huang W 2022 Stereolithography of 3D sustainable metal electrodes towards high-performance nickel iron battery Adv. Funct. Mater. 32 2205317
38. Katsuyama Y, Kudo A, Kobayashi H, Han J, Chen M, Honma I and Kaner R B 2022 A 3D-printed, freestanding carbon lattice for sodium ion batteries Small 18 2202277
39. Costa G, Lopes P A, Sanati A L, Silva A F, Freitas M C and Tavakoli M 2022 3D printed stretchable liquid gallium battery Adv. Funct. Mater. 32 2113232
40. Pinto R S, Gonçalves R, Lanceros-Méndez S and Costa C M 2022 Three-dimensional printing for solid-state batteries Solid State Batteries 2: Materials and Advanced Devices (American Chemical Society) pp 331-50
41. Narita K et al 2022 Additive manufacturing of 3D batteries: a perspective J. Mater. Res. 37 1535-46
42. Zeng L, He H, Chen H, Luo D, He J and Zhang C 2022 3D printing architecting reservoir-integrated anode for dendrite-free, safe, and durable Zn batteries Adv. Energy Mater. 12 2103708
43. Ben-Barak I et al 2022 Drop-on-demand 3D-printed silicon-based anodes for lithium-ion batteries J. Solid State Electrochem. 26 183-193
44. Tian X and Xu B 2021 3D printing for solid-state energy storage Small Methods 5 2100877
45. Zhang F, Wu K, Xu X, Wu W, Hu X, Yu K and Liang C 2021 3D printing of graphite electrode for lithium-ion battery with high areal capacity Energy Technol. 9 2100628
46. Gao W and Pumera M 2021 3D printed nanocarbon frameworks for Li-ion battery cathodes Adv. Funct. Mater. 31 2007285
47. Tata Rao L, Rewatkar P, Dubey SK, Javed A and Goel S 2020 Performance optimization of microfluidic paper fuel-cell with varying cellulose fiber papers as absorbent pad Int. J. Energy Res. 44 3893-904
48. Scarcia U, Berselli G, Melchiorri C, Ghinelli M and Palli G 2016 Optimal design of 3D printed spiral torsion springs Conf. on Smart Materials, Adaptive Structures and Intelligent Systems (Stowe, VT) (New York: ASME) 2
49. Miethe J F, Luebkemann F, Schlosser A, Dorfs D and Bigall N C 2020 Revealing the correlation of the electrochemical properties and the hydration of inkjet-printed CdSe/CdS semiconductor gels Langmuir 36 17

Issue