Autors: Bakardzhiev, V. J., Sabev, S. T., Kasabov P.
Title: The Effect of Feed Rate and Cutting Speed to Surface Roughness during hole boring of 32CrMoS4 with anti-vibration boring bar
Keywords: anti-vibration, boring bar, DOE, lathe

Abstract: The article presents an experimental and theoretical approach to studying surface roughness hi a hole with a 45mm diameter and a 50 mm length in 32CrMoS4 steel with anti-vibration bar. The study is focused on the impact of the feed and cutting speed at the surface finish of the part. Based on the results and using "Minitab 19" software, a mathematic model was made to predict the surface quality hi connection with different cutting conditions. Finally, an experiment analysis was carried out to verify the analytical results.

References

  1. David J. Whitehouse, Surfaces and Their Measurement. Book • 2002 https://doi.org/10.1016/B978-1-903996-01-0.X5000-2
  2. Zurita-Hurtado O. J., Di Graci-Tiralongo V. C., & Capace-Aguirre M. C. (2017). Effect of surface hardness and roughness produced by turning on the torsion mechanical properties of annealed AISI 1020 steel. Revista Facultad De Ingenieria Universidad De Antioquia, (84), 55-59. https://doi.org/10.17533/udea.redin.n84a07
  3. Kumar NS, Shetty A, Shetty A, Ananth K, Shetty H (2012) Effect of spindle speed and feed rate on surface roughness of Carbon Steels in CNC turning. Procedia Engineering 38: 691-697. https://doi.org/10.1016/j.proeng.2012.06.087
  4. J.D. Thiele and S.N. Melkote, "Effect of cutting edge geometry and work-piece hardness on surface generation in the finish hard turning of AISI 52100 steel," Journal of Materials Processing Technology, vol. 94, 1999, pp. 216-226.
  5. W. Chen, "Cutting forces and surface finish when machining mediumhardness steel using CBN tools," International Journal of Machine Tools Manufacturing, vol. 40, 2000, pp. 455-466.
  6. S.M. Darwish, "Theimpact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloy," Journal of Materials Processing Technology, Vol. 97, 2000, pp. 10-18.
  7. Samya Dahbi, Haj El Moussami, Latifa Ezzine. Optimization of turning parameters for surface rough-ness. Xème Conférence Internationale: Conception et Production Intégrées, Dec 2015, Tanger. https://hal.archives-ouvertes.fr/hal-01260818
  8. M. Nurhaniza, M. K. A. M. Ariffin, F. Mustapha, B. T. H. T. Baharudin, "Analyzing the Effect of Machining Parameters Setting to the Surface Roughness during End Milling of CFRP-Aluminium Composite Laminates", International Journal of Manufacturing Engineering, vol. 2016, Article ID 4680380, 9 pages, 2016. https://doi.org/10.1155/2016/4680380
  9. C. Rao, D. Rao, P. Srihari Influence of cutting parameters on cutting force and surface finish in turning operation Procedia Eng., 64 (2013), pp. 1405 1415 https://doi.org/10.1016Zj.proeng.2013.09.222

Issue

AIP Conference Proceedings, vol. 2980, 2024, , https://doi.org/10.1063/5.0190032

Вид: публикация в международен форум, публикация в реферирано издание, индексирана в Scopus